Amikon Limited factory
Bently Nevada 21000 or 24701: Which Probe Housing Fits Your Installation? 2026-11-02
OverviewCompare ModelsDimensional ViewsInstallationFAQ

Bently Nevada - External Probe Mounting

Choose the housing around the installation, not only the probe. These all-metal assemblies preserve the sleeve, conduit and hazardous-area details required by the machine.

21000Aluminum housing
24701Stainless-steel housing
API 670External probe housing
CSA Type 4Approved CA versions
01

What the 21000 and 24701 assemblies do

Bently Nevada 21000 and 24701 Proximity Probe Housing Assemblies provide an external mounting point for reverse-mount proximity probes. The dome cover, housing body, conduit ports and probe sleeve keep the probe mechanically supported while allowing the probe connection and gap adjustment to remain accessible from outside the machine casing.

The two families perform the same basic role but use different body materials. The 21000 uses an aluminum body with a 304 stainless-steel sleeve, while the 24701 uses a 303 stainless-steel body with a 304 stainless-steel sleeve. That distinction affects housing mass and material selection without changing the need to match the probe, sleeve, mounting thread and conduit arrangement as one configuration.

Typical applications use 3300 XL 8 mm, 3300 XL NSv or 3300 XL 11 mm probes, depending on the selected ordering option. The housing itself is not the measuring electronics; it positions and protects the probe, provides external access and establishes the mechanical boundary around the sensing chain.

Selection starts with four questions

  • Which probe family and approval option is required?
  • Is aluminum or stainless steel appropriate for the installation?
  • How long must the sleeve and exposed penetration be?
  • Which fittings and mounting thread match the machine and conduit?
Long-sleeve rule: sleeve lengths over 304 mm (12 in) require additional support near the probe to reduce unsupported vibration and resonance.
02

21000 versus 24701 at a glance

Engineering item 21000 housing 24701 housing
Body material Aluminum 303 stainless steel
Sleeve material 304 stainless steel 304 stainless steel
Typical mass, without fittings 1.1 kg (2.4 lb) 1.8 kg (4.1 lb)
Housing width A 83.3 mm (3.28 in) 78.2 mm (3.08 in)
Housing height B 161.6 mm (6.36 in) 151.9 mm (5.97 in)
Lower housing dimension E 26.7 mm (1.05 in) 27.9 mm (1.10 in)
Probe families available through ordering options 3300 XL 8 mm, 3300 XL NSv, 3300 XL 11 mm and selected legacy or special probe options
Certified enclosure / installation context CA21000 and CA24701 versions: CSA Type 4 and explosion-proof approvals for specified North American hazardous areas; standard 21000 and 24701 versions are used for other end-user countries
03

What is inside the housing assembly

The housing is a coordinated mechanical assembly. Each part has a separate job, so replacing the housing body without checking the probe and sleeve codes can leave the installed geometry or conduit path inconsistent.

Dome coverScrews into the housing body and closes the accessible upper section.
Conduit portsProvide threaded paths for cable routing and the selected fitting arrangement.
Probe sleeveSupports the reverse-mount probe at the required penetration depth.
O-rings and thread sealComplete the sealing interfaces defined for the assembly.
Reverse-mount probeProvides the actual non-contact proximity measurement at the target.
Standoff adapterOptional length element used to establish the required C dimension.
Conduit fittingsSelected separately by ordering option to suit the cable and conduit arrangement.
Mounting threadDefines how the housing attaches to the machine mounting point.

Real-product detail comparison

Close-up of the Bently Nevada 21000-16-10-15-144-03-02 identification label and housing body
1. Identify the 21000 housing

The close-up keeps the 21000-16-10-15-144-03-02 label, metal body and conduit opening visible so the series and complete configuration can be checked together.

Close-up of the Bently Nevada 24701-34-05-00-060-03-02 stainless-steel housing and mounting section
2. Compare the 24701 body

The 24701-34-05-00-060-03-02 example brings the stainless-steel housing, identification label and threaded mounting section into one inspection view.

Close-up of the probe sleeve and white protective tip on a Bently Nevada 24701 housing assembly
3. Inspect the sleeve and tip

The enlarged right-hand detail shows the straight probe sleeve, its transition from the housing and the white protective tip fitted for handling and shipment.

Photo boundary: these enlarged details come from real ordered examples, not generic illustrations. Probe option, lead length, standoff, penetration, fittings and mounting thread still change with the complete 21000 or 24701 catalogue number. Click any circle to view the uncropped original photo.

04

Official dimensional views

Bently Nevada 21000 and CA21000 proximity probe housing assembly dimensional drawing
21000 / CA21000 housing geometry, sleeve path and cable-length limits. Click for the high-resolution original crop.
Aluminum housing family

Read the 21000 drawing as one mechanical path

The drawing connects the housing body, optional standoff adapter, 304 stainless-steel sleeve and reverse-mount probe. Dimensions C and D are selected from the installed mounting surface and target position rather than copied from the housing body alone.

  • Housing width A: 83.3 mm (3.28 in)
  • Housing height B: 161.6 mm (6.36 in)
  • Typical housing mass without fittings: 1.1 kg (2.4 lb)
Bently Nevada 24701 and CA24701 proximity probe housing assembly dimensional drawing
24701 / CA24701 housing geometry, sleeve path and cable-length limits. Click for the high-resolution original crop.
Stainless-steel housing family

Use the 24701 view to verify material and clearance

The 24701 keeps the same external-probe-housing function while changing the body to 303 stainless steel. The sleeve remains 304 stainless steel, so the complete configuration still depends on probe family, lead length, penetration, fittings and mounting thread.

  • Housing width A: 78.2 mm (3.08 in)
  • Housing height B: 151.9 mm (5.97 in)
  • Typical housing mass without fittings: 1.8 kg (4.1 lb)
05

How to build the ordering configuration

The 21000 and 24701 records use the structure 21000-AA-BB-CC-DDD-EE-FF or 24701-AA-BB-CC-DDD-EE-FF. The complete string matters because it defines the probe and the mechanical installation together.

1Select the probe option

Choose the reverse-mount probe family, connector-protector execution and approval option that matches the associated transducer system. If no probe is supplied, use the documented no-probe option rather than inferring a probe from the housing.

2Match the cable length

Available probe-lead selections include specified imperial and metric lengths. The probe lead must be longer than the sleeve, and the cable option must remain consistent with the probe system.

3Set standoff and penetration

Option C defines the optional standoff adapter; option D defines probe penetration. C is ordered in 0.5 in increments and D in 0.1 in increments within the published limits.

4Choose fittings

Options cover no fittings, explosion-proof fittings, plugs, reducers and cable-seal grips. The fitting selection must match the conduit and approval arrangement.

5Confirm mounting thread

The final field identifies the mounting thread. Verify the machine-side tapped opening and the required thread engagement before the sleeve length is finalized.

6Record the complete assembly

Keep the housing, probe, sleeve, standoff, fittings and mounting thread together in the purchasing and installation record so field geometry remains traceable.

06

Installation checks that prevent rework

Support long sleeves before resonance becomes a problem

If the combined sleeve arrangement extends beyond 304 mm (12 in), add support near the probe. Bently Nevada identifies probe support and oil seal part number 37948-01 for long sleeves that pass through an inner bearing housing, and custom supports may be required for other machine geometries.

Keep the probe lead longer than the sleeve

The cable must reach through the housing without being tensioned by the sleeve arrangement. Select the lead length after the mechanical C and D dimensions have been established, not before.

Set probe position with the matching probe-system procedure

Mounting the housing does not replace the probe-system setup. Gap, target material, extension cable and Proximitor sensor still belong to the selected 3300 XL or NSv system and must follow that system's installation limits.

Do not infer hazardous-area approval from a fitting alone

Explosion-proof fittings are available for multiple configurations, but only the specified CA housing versions carry the stated CSA explosion-proof housing certification. Confirm the entire ordered assembly and the applicable country approval before installation.

07

Hazardous-area and API 670 considerations

CSA Type 4 and hazardous areas

CA21000 and CA24701 housings are certified for specified Class I, II and III North American locations. Temperature-code limits and drawing requirements still apply to the completed installation.

API 670 external probe housing

The 21000 and 24701 housing families are designed around the externally mounted proximity-probe housing requirements referenced by API 670, including accessible probe mounting and defined mechanical support.

Regional ordering boundary: CA housing variants are identified for North American end users. For other end-user countries, use the applicable 21000 or 24701 housing record and verify country-specific approvals.
08

Questions engineers and buyers ask

When should I choose the Bently Nevada 21000 instead of the 24701?
Choose between the 21000 aluminum body and the 24701 stainless-steel body according to the documented material requirement, machine environment and complete approved configuration. Both use a 304 stainless-steel sleeve and perform the same external probe-housing role.
Can a 21000 or 24701 housing be ordered without a probe?
Yes. The ordering structure includes a no-probe option. The remaining cable, sleeve, fitting and mounting fields still need to describe the mechanical assembly accurately.
Why does the 21000 or 24701 sleeve need extra support?
Sleeves longer than 304 mm (12 in) can vibrate when unsupported. A support close to the probe reduces resonance and helps preserve the intended probe position relative to the target.
Does an explosion-proof fitting make every 21000 or 24701 housing explosion proof?
No. The housing approval applies to specified CA21000 or CA24701 configurations and approval conditions. A fitting option alone does not convert a standard housing into a certified explosion-proof assembly.
Can the 21000 and 24701 use the same probe families?
Both families offer ordering options for common Bently Nevada reverse-mount probe systems, including 3300 XL 8 mm, 3300 XL NSv and 3300 XL 11 mm variants. The exact option and approval suffix must match the associated transducer system.
How do I determine the C and D dimensions for a 21000 or 24701 housing?
C is the optional standoff-adapter dimension and D is the probe-penetration dimension. Determine them from the machine mounting surface, target location and required probe adjustment range, then encode them in the complete ordering string.
Why must the probe lead be longer than the 21000 or 24701 sleeve?
The lead must pass through the housing and sleeve without being stretched or terminated inside the sleeve path. A lead shorter than the mechanical arrangement cannot provide the required external connection.
What information should I send when requesting a 21000 or 24701 quotation?
Send the complete model string, probe family, approval requirement, cable length, C and D dimensions, fitting option, mounting thread, quantity and destination country. A label photo or existing drawing helps verify legacy installations.

Contact & Enquiry

Send the complete housing model, quantity and installation details.

ManagerLeonia
selamat datang di Amikon Terbatas
jika Anda memiliki pertanyaan atau saran, silakan tinggalkan pesan untuk kami, kami akan membalas Anda secepat yang kami bisa!

Rumah

Produk

tentang

kontak